Repsol Libra Hidroulico HLP 68

Description
Lubricants included in this range are specially designed for use in hydraulic circuits requiring fluids with anti-wear properties. They are manufactured with a mixture of selected and highly refined mineral bases and high quality regenerated bases, carefully treated and purified and specific additives that improve the anti-wear properties have been selected.These new oils,besides being environmentally-friendly, offer the same quality as any other HLP category lubricant on the market. As a further step in Repsol's commitment to sustainable development, this product range complies with waste management and is the link that closes the ecological chain of the production, use, collection and recovery of waste oils.

Recommended uses
They are oils that are well suited for most hydraulic circuits, including those that require special anti-wear protection, both in industry and with automobiles (dump trucks, machinery for public works, etc.). This is all regardless of the type of pump with which they are equipped and of the pressures being worked under.
Properties
Resistance to oxidation, ageing and sludge formation.
Low freezing point.
High viscosity.
Compatible with joints.
Good antifoaming properties.
Marked anti-wear properties.
Easy water separation.

Quality Level
DIN 51524 part 2 (HLP)
ISO 6743/4 (HM)
Technical characteristics

Available in
185 kg metallic cans and 875 kg plastic containers
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
This product must be used taking care to avoid prolonged contact with the skin. It is advised that you wear gloves, visors or goggles to avoid splashes.

Health and safety hazards
Inhalation: Given that it is not a particularly volatile product, the risk of inhalation is minimal.
Ingestion: Do not induce vomiting. Provide water. Seek medical advice.
Contact with the skin: Wash with plenty of water and soap.
Eyes: Wash with plenty of water.
General measures: Seek medical advice.
Fire fighting measure
No special measures required.
Fire-extinguishing measures: Foams, dry chemicals, CO2, water spray. Do not apply the jet of water directly as this could cause the product to disperse.
Environmental precautions
Risk of physical contamination when spilled (waterways, coastal areas, soils, etc.) due to its floatability and oily consistency; could cause harm to flora and fauna on contact. Avoid material getting into water outlets.
Decontamination and cleaning: Treat like an accidental oil spill. Prevent dispersion using mechanical barriers and remove by physical or chemical means.